FreeBSD on the Asus P5B-VM motherboard

I setup one of these Asus P5B-VM motherboards at work about three months ago. Its working alright, been up for 77 days running moderately loaded 6.2-STABLE. The only negative was that the Realtek NIC did not work. I only had a couple of days with it before it had to be tested for production and I couldn't get the re0 device to work. I had never planned to use the Realtek as I had Intel Pro 1000 cards for it. Here is a dmesg without the Intel cards in it:

Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
   The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Fri Jan 12 11:05:30 UTC 2007
    root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0b63000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0b63188.
Calibrating clock(s) ... i8254 clock: 1193217 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2133345600 Hz
CPU: Intel(R) Core(TM)2 CPU          6400  @ 2.13GHz (2133.35-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6f6  Stepping = 6
  Features=0xbfebfbff<fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,
pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>
  Features2=0xe3bd<sse3,rsvd2,mon,ds_cpl,vmx,est,tm2,<b9>,CX16,<b14>,<b15>>
  AMD Features=0x20100000<nx,lm>
  AMD Features2=0x1<lahf>
  Cores per package: 2
real memory  = 2129199104 (2030 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c28000 - 0x000000007ca8dfff, 2078695424 bytes (507494 pages)
avail memory = 2078400512 (1982 MB)
MP Configuration Table version 1.4 found at 0xc00e3e10
Table 'FACP' at 0x7ee90290
Table 'APIC' at 0x7ee90390
MADT: Found table at 0x7ee90390
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 2: enabled
SMP: Added CPU 1 (AP)
MADT: Found CPU APIC ID 130 ACPI ID 3: disabled
MADT: Found CPU APIC ID 131 ACPI ID 4: disabled
INTR: Adding local APIC 0 as a target
ACPI APIC Table: <a>
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
bios32: Found BIOS32 Service Directory header at 0xc00f0000
bios32: Entry = 0xf0010 (c00f0010)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x31
pnpbios: Found PnP BIOS data at 0xc00f6910
pnpbios: Entry = f0000:7aaa  Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: high
ioapic0 <version> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010000
wlan: <802.11>
ath_rate: version 1.2 <samplerate>
null: <null>
random: <entropy>
nfslock: pseudo-device
io: <i/o>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
rr232x: RocketRAID 232x controller driver v1.02 (Jan 12 2007 11:05:04)
npx0: INT 16 interface
acpi0: <a> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
pci_open(1):   mode 1 addr port (0x0cf8) is 0x80030004
pci_open(1a):  mode1res=0x80000000 (0x80000000)
pci_cfgcheck:  device 0 [class=060000] [hdr=00] is there (id=29a08086)
pcibios: BIOS version 3.00
Found $PIR table, 16 entries at 0xc00f6750
PCI-Only Interrupts: none
Location  Bus Device Pin  Link  IRQs
embedded    0    1    A   0x60  3 4 5 6 7 10 11 12 14 15
embedded    0    1    B   0x61  3 4 5 6 7 10 11 12 14 15
embedded    0    1    C   0x62  3 4 5 6 7 10 11 12 14 15
embedded    0    1    D   0x63  3 4 5 6 7 10 11 12 14 15
embedded    0    3    A   0x60  3 4 5 6 7 10 11 12 14 15
embedded    0    3    B   0x61  3 4 5 6 7 10 11 12 14 15
embedded    0    3    C   0x62  3 4 5 6 7 10 11 12 14 15
embedded    0   31    A   0x62  3 4 5 6 7 10 11 12 14 15
embedded    0   31    B   0x63  3 4 5 6 7 10 11 12 14 15
embedded    0   31    C   0x62  3 4 5 6 7 10 11 12 14 15
embedded    0   29    A   0x6b  3 4 5 6 7 10 11 12 14 15
embedded    0   29    B   0x63  3 4 5 6 7 10 11 12 14 15
embedded    0   29    C   0x62  3 4 5 6 7 10 11 12 14 15
embedded    0   29    D   0x60  3 4 5 6 7 10 11 12 14 15
embedded    0   26    A   0x60  3 4 5 6 7 10 11 12 14 15
embedded    0   26    B   0x61  3 4 5 6 7 10 11 12 14 15
embedded    0   26    C   0x62  3 4 5 6 7 10 11 12 14 15
embedded    0   27    A   0x6a  3 4 5 6 7 10 11 12 14 15
embedded    0   28    A   0x61  3 4 5 6 7 10 11 12 14 15
embedded    0   28    B   0x60  3 4 5 6 7 10 11 12 14 15
embedded    0   28    C   0x62  3 4 5 6 7 10 11 12 14 15
embedded    0   28    D   0x63  3 4 5 6 7 10 11 12 14 15
slot 32     4    0    A   0x60  3 4 5 6 7 10 11 12 14 15
slot 32     4    0    B   0x61  3 4 5 6 7 10 11 12 14 15
slot 32     4    0    C   0x62  3 4 5 6 7 10 11 12 14 15
slot 32     4    0    D   0x63  3 4 5 6 7 10 11 12 14 15
slot 36     3    0    A   0x60  3 4 5 6 7 10 11 12 14 15
slot 36     3    0    B   0x61  3 4 5 6 7 10 11 12 14 15
slot 36     3    0    C   0x62  3 4 5 6 7 10 11 12 14 15
slot 36     3    0    D   0x63  3 4 5 6 7 10 11 12 14 15
slot 37     2    0    A   0x61  3 4 5 6 7 10 11 12 14 15
slot 37     2    0    B   0x62  3 4 5 6 7 10 11 12 14 15
slot 37     2    0    C   0x63  3 4 5 6 7 10 11 12 14 15
slot 37     2    0    D   0x60  3 4 5 6 7 10 11 12 14 15
embedded    0   25    A   0x68  3 4 5 6 7 10 11 12 14 15
embedded    0   25    B   0x69  3 4 5 6 7 10 11 12 14 15
slot 1      5    3    A   0x60  3 4 5 6 7 10 11 12 14 15
slot 1      5    3    B   0x61  3 4 5 6 7 10 11 12 14 15
slot 1      5    3    C   0x62  3 4 5 6 7 10 11 12 14 15
slot 1      5    3    D   0x63  3 4 5 6 7 10 11 12 14 15
slot 2      5    4    A   0x61  3 4 5 6 7 10 11 12 14 15
slot 2      5    4    B   0x62  3 4 5 6 7 10 11 12 14 15
slot 2      5    4    C   0x63  3 4 5 6 7 10 11 12 14 15
slot 2      5    4    D   0x60  3 4 5 6 7 10 11 12 14 15
embedded    5    1    A   0x68  3 4 5 6 7 10 11 12 14 15
embedded    1    0    A   0x60  3 4 5 6 7 10 11 12 14 15
embedded    1    0    B   0x61  3 4 5 6 7 10 11 12 14 15
embedded    1    0    C   0x62  3 4 5 6 7 10 11 12 14 15
embedded    1    0    D   0x63  3 4 5 6 7 10 11 12 14 15
embedded    0    2    A   0x60  3 4 5 6 7 10 11 12 14 15
embedded    0    2    B   0x61  3 4 5 6 7 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xda321000 pa 0x94000
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit> port 0x808-0x80b on acpi0
pci_link0: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  3 4 5 6 7 10 11 12 14 15
pci_link0: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0   11   N     0  3 4 5 6 7 10 11 12 14 15
pci_link0: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link1: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   10   N     0  3 4 5 6 7 10 11 12 14 15
pci_link1: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0   10   N     0  3 4 5 6 7 10 11 12 14 15
pci_link1: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link2: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0    5   N     0  3 4 5 6 7 10 11 12 14 15
pci_link2: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0    5   N     0  3 4 5 6 7 10 11 12 14 15
pci_link2: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link3: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0   15   N     0  3 4 5 6 7 10 11 12 14 15
pci_link3: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0   15   N     0  3 4 5 6 7 10 11 12 14 15
pci_link3: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link4: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link4: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link4: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link5: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link5: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link5: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link6: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link6: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link6: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 6 7 10 11 12 14 15
pci_link7: Links after initial probe:
Index  IRQ  Rtd  Ref  IRQs
    0    3   N     0  3 4 5 6 7 10 11 12 14 15
pci_link7: Links after initial validation:
Index  IRQ  Rtd  Ref  IRQs
    0    3   N     0  3 4 5 6 7 10 11 12 14 15
pci_link7: Links after disable:
Index  IRQ  Rtd  Ref  IRQs
    0  255   N     0  3 4 5 6 7 10 11 12 14 15
cpu0: <acpi> on acpi0
acpi_perf0: <acpi> on cpu0
cpu1: <acpi> on acpi0
pcib0: <acpi> port 0xcf8-0xcff on acpi0
pci0: <acpi> on pcib0
pci0: physical bus=0
found->  vendor=0x8086, dev=0x29a0, revid=0x02
   bus=0, slot=0, func=0
   class=06-00-00, hdrtype=0x00, mfdev=0
   cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
   lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->  vendor=0x8086, dev=0x29a1, revid=0x02
   bus=0, slot=1, func=0
   class=06-04-00, hdrtype=0x01, mfdev=0
   cmdreg=0x0106, statreg=0x0010, cachelnsz=8 (dwords)
   lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
   intpin=a, irq=11
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
found->  vendor=0x8086, dev=0x29a2, revid=0x02
   bus=0, slot=2, func=0
   class=03-00-00, hdrtype=0x00, mfdev=0
   cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
   lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
   intpin=a, irq=11
   powerspec 2  supports D0 D3  current D0
   MSI supports 1 message
   map[10]: type 1, range 32, base ffa00000, size 20, enabled
   map[18]: type 3, range 64, base d0000000, size 28, enabled
   map[20]: type 4, range 32, base 0000ec00, size  3, enabled
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 16
found->  vendor=0x8086, dev=0x2834, revid=0x02
   bus=0, slot=26, func=0
   class=0c-03-00, hdrtype=0x00, mfdev=1
   cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
   lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
   intpin=a, irq=11
   map[20]: type 4, range 32, base 0000d880, size  5, enabled
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 16
found->  vendor=0x8086, dev=0x2835, revid=0x02
   bus=0, slot=26, func=1
   class=0c-03-00, hdrtype=0x00, mfdev=0
   cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
   lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
   intpin=b, irq=10
   map[20]: type 4, range 32, base 0000dc00, size  5, enabled
pcib0: matched entry for 0.26.INTB
pcib0: slot 26 INTB hardwired to IRQ 17
found->  vendor=0x8086, dev=0x283a, revid=0x02
   bus=0, slot=26, func=7
   class=0c-03-20, hdrtype=0x00, mfdev=0
   cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
   lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
   intpin=c, irq=5
   powerspec 2  supports D0 D3  current D0
   map[10]: type 1, range 32, base ff9fb800, size 10, enabled
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 18
found->  vendor=0x8086, dev=0x283f, revid=0x02
   bus=0, slot=28, func=0
   class=06-04-00, hdrtype=0x01, mfdev=1
   cmdreg=0x0106, statreg=0x0010, cachelnsz=8 (dwords)
   lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
   intpin=a, irq=10
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found->  vendor=0x8086, dev=0x2847, revid=0x02
   bus=0, slot=28, func=4
   class=06-04-00, hdrtype=0x01, mfdev=1
   cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
   lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
   intpin=a, irq=10
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found->  vendor=0x8086, dev=0x2849, revid=0x02
   bus=0, slot=28, func=5
   class=06-04-00, hdrtype=0x01, mfdev=1
   cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
   lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
   intpin=b, irq=11
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to IRQ 16
found->  vendor=0x8086, dev=0x2830, revid=0x02
   bus=0, slot=29, func=0
   class=0c-03-00, hdrtype=0x00, mfdev=1
   cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
   lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
   intpin=a, irq=3
   map[20]: type 4, range 32, base 0000d400, size  5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found->  vendor=0x8086, dev=0x2831, revid=0x02
   bus=0, slot=29, func=1
   class=0c-03-00, hdrtype=0x00, mfdev=0
   cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
   lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
   intpin=b, irq=15
   map[20]: type 4, range 32, base 0000d480, size  5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found->  vendor=0x8086, dev=0x2832, revid=0x02
   bus=0, slot=29, func=2
   class=0c-03-00, hdrtype=0x00, mfdev=0
   cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
   lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
   intpin=c, irq=5
   map[20]: type 4, range 32, base 0000d800, size  5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found->  vendor=0x8086, dev=0x2836, revid=0x02
   bus=0, slot=29, func=7
   class=0c-03-20, hdrtype=0x00, mfdev=0
   cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
   lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
   intpin=a, irq=3
   powerspec 2  supports D0 D3  current D0
   map[10]: type 1, range 32, base ff9fb400, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found->  vendor=0x8086, dev=0x244e, revid=0xf2
   bus=0, slot=30, func=0
   class=06-04-01, hdrtype=0x01, mfdev=0
   cmdreg=0x0105, statreg=0x0010, cachelnsz=0 (dwords)
   lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
found->  vendor=0x8086, dev=0x2810, revid=0x02
   bus=0, slot=31, func=0
   class=06-01-00, hdrtype=0x00, mfdev=1
   cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
   lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->  vendor=0x8086, dev=0x2820, revid=0x02
   bus=0, slot=31, func=2
   class=01-01-8f, hdrtype=0x00, mfdev=0
   cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
   lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
   intpin=b, irq=15
   powerspec 3  supports D0 D3  current D0
   map[10]: type 4, range 32, base 0000e880, size  3, enabled
   map[14]: type 4, range 32, base 0000e800, size  2, enabled
   map[18]: type 4, range 32, base 0000e480, size  3, enabled
   map[1c]: type 4, range 32, base 0000e400, size  2, enabled
   map[20]: type 4, range 32, base 0000e080, size  4, enabled
   map[24]: type 4, range 32, base 0000e000, size  4, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
found->  vendor=0x8086, dev=0x283e, revid=0x02
   bus=0, slot=31, func=3
   class=0c-05-00, hdrtype=0x00, mfdev=0
   cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
   lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
   intpin=c, irq=15
   map[10]: type 1, range 32, base 00000000, size  8, memory disabled
   map[20]: type 4, range 32, base 00000400, size  5, enabled
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to IRQ 18
found->  vendor=0x8086, dev=0x2825, revid=0x02
   bus=0, slot=31, func=5
   class=01-01-85, hdrtype=0x00, mfdev=0
   cmdreg=0x0005, statreg=0x02b0, cachelnsz=0 (dwords)
   lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
   intpin=b, irq=15
   powerspec 3  supports D0 D3  current D0
   map[10]: type 4, range 32, base 0000d080, size  3, enabled
   map[14]: type 4, range 32, base 0000d000, size  2, enabled
   map[18]: type 4, range 32, base 0000cc00, size  3, enabled
   map[1c]: type 4, range 32, base 0000c880, size  2, enabled
   map[20]: type 4, range 32, base 0000c800, size  4, enabled
   map[24]: type 4, range 32, base 0000c480, size  4, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
pcib1: <acpi> irq 16 at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x0-0x0
pcib1:   memory decode     0xfff00000-0xfffff
pcib1:   prefetched decode 0xbfd00000-0xbfdfffff
pci1: <acpi> on pcib1
pci1: physical bus=1
pci0: <display,> at device 2.0 (no driver attached)
uhci0: <uhci> port 0xd880-0xd89f irq 16 at device 26.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd880
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49
uhci0: [GIANT-LOCKED]
usb0: <uhci> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <uhci> port 0xdc00-0xdc1f irq 17 at device 26.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xdc00
ioapic0: routing intpin 17 (PCI IRQ 17) to vector 50
uhci1: [GIANT-LOCKED]
usb1: <uhci> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0: <ehci> mem 0xff9fb800-0xff9fbbff irq 18 at device 26.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xff9fb800
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 51
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <ehci> on ehci0
usb2: USB revision 2.0
uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
pcib2: <acpi> irq 17 at device 28.0 on pci0
pcib2:   secondary bus     4
pcib2:   subordinate bus   4
pcib2:   I/O decode        0x0-0x0
pcib2:   memory decode     0xfff00000-0xfffff
pcib2:   prefetched decode 0xbfe00000-0xbfefffff
pci4: <acpi> on pcib2
pci4: physical bus=4
pcib3: <acpi> irq 17 at device 28.4 on pci0
pcib3:   secondary bus     3
pcib3:   subordinate bus   3
pcib3:   I/O decode        0xb000-0xbfff
pcib3:   memory decode     0xff700000-0xff7fffff
pcib3:   prefetched decode 0xfff00000-0xfffff
pci3: <acpi> on pcib3
pci3: physical bus=3
found->  vendor=0x197b, dev=0x2363, revid=0x02
   bus=3, slot=0, func=0
   class=01-01-85, hdrtype=0x00, mfdev=0
   cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
   lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
   intpin=a, irq=11
   powerspec 2  supports D0 D3  current D0
   map[10]: type 4, range 32, base 0000bc00, size  3, enabled
pcib3: (null) requested I/O range 0xbc00-0xbc07: in range
   map[14]: type 4, range 32, base 0000b880, size  2, enabled
pcib3: (null) requested I/O range 0xb880-0xb883: in range
   map[18]: type 4, range 32, base 0000b800, size  3, enabled
pcib3: (null) requested I/O range 0xb800-0xb807: in range
   map[1c]: type 4, range 32, base 0000b480, size  2, enabled
pcib3: (null) requested I/O range 0xb480-0xb483: in range
   map[20]: type 4, range 32, base 0000b400, size  4, enabled
pcib3: (null) requested I/O range 0xb400-0xb40f: in range
   map[24]: type 1, range 32, base ff7fe000, size 13, enabled
pcib3: (null) requested memory range 0xff7fe000-0xff7fffff: good
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 16
atapci0: <jmicron> port 0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb807,0xb480-0xb483,
0xb400-0xb40f
mem 0xff7fe000-0xff7fffff irq 16 at device 0.0 on pci3
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xb400
atapci0: [MPSAFE]
atapci0: Reserved 0x2000 bytes for rid 0x24 type 3 at 0xff7fe000
atapci0: AHCI Version 01.00 controller with 2 ports detected
ata2: <ata> on atapci0
ata2: SATA connect status=00000000
ata2: [MPSAFE]
ata3: <ata> on atapci0
ata3: SATA connect status=00000000
ata3: [MPSAFE]
ata4: <ata> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xbc00
atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xb880
ata4: reset tp1 mask=03 ostat0=50 ostat1=00
ata4: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata4: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata4: reset tp2 stat0=50 stat1=00 devices=0x1
ata4: [MPSAFE]
pcib4: <acpi> irq 16 at device 28.5 on pci0
pcib4:   secondary bus     2
pcib4:   subordinate bus   2
pcib4:   I/O decode        0xa000-0xafff
pcib4:   memory decode     0xff600000-0xff6fffff
pcib4:   prefetched decode 0xfff00000-0xfffff
pci2: <acpi> on pcib4
pci2: physical bus=2
found->  vendor=0x10ec, dev=0x8168, revid=0x01
   bus=2, slot=0, func=0
   class=02-00-00, hdrtype=0x00, mfdev=0
   cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
   lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
   intpin=a, irq=10
   powerspec 2  supports D0 D1 D2 D3  current D0
   MSI supports 2 messages, 64 bit
   map[10]: type 4, range 32, base 0000a800, size  8, enabled
pcib4: (null) requested I/O range 0xa800-0xa8ff: in range
   map[18]: type 1, range 64, base ff6ff000, size 12, enabled
pcib4: (null) requested memory range 0xff6ff000-0xff6fffff: good
pcib4: matched entry for 2.0.INTA
pcib4: slot 0 INTA hardwired to IRQ 17
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xa800
pcib4: re0 requested I/O range 0xa800-0xa8ff: in range
pcib4: re0 requested I/O range 0xa800-0xa8ff: in range
pcib4: re0 requested I/O range 0xa800-0xa8ff: in range
re0: <realtek> port 0xa800-0xa8ff mem 0xff6ff000-0xff6fffff irq 17 at device 0.0 on pci2
pcib4: re0 requested I/O range 0xa800-0xa8ff: in range
miibus0: <mii> on re0
rgephy0: <rtl8169s/8110s> on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
re0: bpf attached
re0: Ethernet address: 00:18:f3:03:2d:2b
re0: [MPSAFE]
re0: [FAST]
uhci2: <uhci> port 0xd400-0xd41f irq 23 at device 29.0 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd400
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 52
uhci2: [GIANT-LOCKED]
usb3: <uhci> on uhci2
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhci3: <uhci> port 0xd480-0xd49f irq 19 at device 29.1 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd480
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 53
uhci3: [GIANT-LOCKED]
usb4: <uhci> on uhci3
usb4: USB revision 1.0
uhub4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhci4: <uhci> port 0xd800-0xd81f irq 18 at device 29.2 on pci0
uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd800
uhci4: [GIANT-LOCKED]
usb5: <uhci> on uhci4
usb5: USB revision 1.0
uhub5: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
ehci1: <ehci> mem 0xff9fb400-0xff9fb7ff irq 23 at device 29.7 on pci0
ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xff9fb400
ehci1: [GIANT-LOCKED]
usb6: EHCI version 1.0
usb6: companion controllers, 2 ports each: usb3 usb4 usb5
usb6: <ehci> on ehci1
usb6: USB revision 2.0
uhub6: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub6: 6 ports with 6 removable, self powered
pcib5: <acpi> at device 30.0 on pci0
pcib5:   secondary bus     5
pcib5:   subordinate bus   5
pcib5:   I/O decode        0xf000-0xfff
pcib5:   memory decode     0x0-0x0
pcib5:   prefetched decode 0x0-0x0
pcib5:   Subtractively decoded bridge.
pci5: <acpi> on pcib5
pci5: physical bus=5
isab0: <pci-isa> at device 31.0 on pci0
isa0: <isa> on isab0
atapci1: <intel> port 0xe880-0xe887,0xe800-0xe803,0xe480-0xe487,0xe400-0xe403,
0xe080-0xe08f,0xe000-0xe00f irq 19 at device 31.2 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xe080
atapci1: [MPSAFE]
ata5: <ata> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xe880
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xe800
ata5: reset tp1 mask=03 ostat0=7f ostat1=7f
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata5: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata5: reset tp2 stat0=ff stat1=ff devices=0x0
ata5: [MPSAFE]
ata6: <ata> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xe480
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xe400
ata6: reset tp1 mask=03 ostat0=7f ostat1=7f
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata6: reset tp2 stat0=ff stat1=ff devices=0x0
ata6: [MPSAFE]
pci0: <serial> at device 31.3 (no driver attached)
atapci2: <intel> port 0xd080-0xd087,0xd000-0xd003,0xcc00-0xcc07,0xc880-0xc883,
0xc800-0xc80f,0xc480-0xc48f irq 19 at device 31.5 on pci0
atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xc800
atapci2: [MPSAFE]
ata7: <ata> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0xd080
atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0xd000
ata7: reset tp1 mask=03 ostat0=7f ostat1=7f
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata7: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata7: reset tp2 stat0=ff stat1=ff devices=0x0
ata7: [MPSAFE]
ata8: <ata> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0xcc00
atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0xc880
ata8: reset tp1 mask=03 ostat0=7f ostat1=7f
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata8: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata8: reset tp2 stat0=ff stat1=ff devices=0x0
ata8: [MPSAFE]
acpi_button0: <power> on acpi0
fdc0: <floppy> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
ioapic0: routing intpin 6 (ISA IRQ 6) to vector 54
fdc0: [MPSAFE]
fdc0: [FAST]
atkbdc0: <keyboard> port 0x60,0x64 irq 1 on acpi0
atkbd0: <at> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 55
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ex_isa_identify()
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
ahc_isa_probe 11: ioport 0xbc00 alloc failed
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ahc_isa_probe 13: ioport 0xdc00 alloc failed
ahc_isa_probe 14: ioport 0xec00 alloc failed
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <isa> at iomem 0xc0000-0xcafff,0xcb000-0xcd7ff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 56
ata0: [MPSAFE]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 57
ata1: [MPSAFE]
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
ppc0: parallel port not found.
ppc0: <parallel> failed to probe at irq 7 on isa0
sc0: <system> at flags 0x100 on isa0
sc0: VGA <16 flags="0x300">
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x8c29 0x8c29 0x8c29 0x8c29
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 58
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x8c29 0x8c29 0x8c29 0x8c29
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <generic> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 133269 -> 100000
procfs registered
lapic: Divisor 2, Frequency 133333680 hz
Timecounter "TSC" frequency 2133345600 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
rr232x: no controller detected.
ata4-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad8: 76319MB <wdc> at ata4-master UDMA100
ad8: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad8
ad8: JMicron check1 failed
ad8: Adaptec check1 failed
ad8: LSI (v3) check1 failed
ad8: LSI (v2) check1 failed
ad8: FreeBSD check1 failed
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x01000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
INTR: Assigning IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 1 to local APIC 0
INTR: Assigning IRQ 4 to local APIC 1
ioapic0: Assigning ISA IRQ 4 to local APIC 1
INTR: Assigning IRQ 6 to local APIC 0
ioapic0: Assigning ISA IRQ 6 to local APIC 0
INTR: Assigning IRQ 9 to local APIC 1
ioapic0: Assigning ISA IRQ 9 to local APIC 1
INTR: Assigning IRQ 14 to local APIC 0
ioapic0: Assigning ISA IRQ 14 to local APIC 0
INTR: Assigning IRQ 15 to local APIC 1
ioapic0: Assigning ISA IRQ 15 to local APIC 1
INTR: Assigning IRQ 16 to local APIC 0
ioapic0: Assigning PCI IRQ 16 to local APIC 0
INTR: Assigning IRQ 17 to local APIC 1
ioapic0: Assigning PCI IRQ 17 to local APIC 1
INTR: Assigning IRQ 18 to local APIC 0
ioapic0: Assigning PCI IRQ 18 to local APIC 0
INTR: Assigning IRQ 19 to local APIC 1
ioapic0: Assigning PCI IRQ 19 to local APIC 1
INTR: Assigning IRQ 23 to local APIC 0
ioapic0: Assigning PCI IRQ 23 to local APIC 0
Trying to mount root from ufs:/dev/ad8s1a
start_init: trying /sbin/init